Warm 15

by Warm
  • Boilers WARM nepotrebuje storage capacity and an additional power supply, because the combustion process is controlled by the control unit when the light is turned off overlaps the access of air which passes exclusively through the fan (turbine) and prevents it from boiling. This scheme of combustion heats the heat exchanger housing above 550 ° C, thereby increasing the longevity of the boiler. Solid fuel boiler Warm 15-80 kW is designed for heating any premises as commercial and residential projects ranging from 50 to 750 m2. For boiler operation are used : wood, sawdust or peat briquettes, sawdust pellets, sawdust, chips. The rounded design of the boiler and its height 2.0-2.2 m allows you to place it in a large combustion chamber, along with the boiler will take up little space in the room. The boiler is laid a certain amount of fuel which is ignited from the top and burns. The combustion occurs in the upper layers, not the bottom, as we used to see in traditional boilers. Thanks to the combustion air distributor falls below thanks to the telescopic pipe, and the heated gases, giving heat warms the inner walls of the boiler. The process of the boiler, thanks to magnetci turbine, which is regulated by an electronic control unit, pdemo the set temperature of the coolant, changing the air supply and the intensity of burning fuel. Thanks turbine needs a large fireplace, enough 3.5 m from the outlet of the boiler. At the core of the boiler is a steel cylinder around which is welded to another steel cylinder of larger diameter. The product insulated.
  • Based on the work of the boiler long burning used simple method - match burns slower if it to burn up vertically with flames than in inverted head down or horizontally. So, the majority of coppers of long burning uses the principle of combustion of the fuel which starts to burn in the upper layer (12-15 cm) and as a burn-out transition to the rest of the fuel from the top to the bottom, while the lower layer is dried and burns more efficiently. Boilers WARM nepotrebuje storage capacity and an additional power supply, because the combustion process is controlled by the control unit when the light is turned off overlaps the access of air which passes exclusively through the fan (turbine) and prevents it from boiling. This scheme of combustion heats the heat exchanger housing above 550 ° C, thereby increasing the longevity of the boiler. Solid fuel boiler Warm 15-80 kW is designed for heating any premises as commercial and residential projects ranging from 50 to 750 m2. For boiler operation are used : wood, sawdust or peat briquettes, sawdust pellets, sawdust, chips. Most interesting is that the chosen fuel type will be determined by the frequency of databasenya boiler fuel consumption the fuel material and the quantity of the generated heat. Combustion of different fuels can last from 14 to 120 hours. The rounded design of the boiler and its height 2.0-2.2 m allows you to place it in a large combustion chamber, along with the boiler will take up little space in the room. In osnovatelno operate this boiler using normal combustion similar to the combustion of matches, which we want to highlight in a dark room. The boiler is laid a certain amount of fuel which is ignited from the top and burns. The combustion occurs in the upper layers, not the bottom, as we used to see in traditional boilers. Thanks to the combustion air distributor falls below thanks to the telescopic pipe, and the heated gases, giving heat warms the inner walls of the boiler. The process of the boiler, thanks to magnetci turbine, which is regulated by an electronic control unit, pdemo the set temperature of the coolant, changing the air supply and the intensity of burning fuel. Thanks turbine needs a large fireplace, enough 3.5 m from the outlet of the boiler. At the core of the boiler is a steel cylinder around which is welded to another steel cylinder of larger diameter. The product insulated. In the front part of the boiler top mounted blower, driven by an electronic control unit. In front of the boiler are the loading door and fuel door for cleaning boiler from the ashes. Also mounted pipe coolant pipe and coolant selection. The blower installed capacity of heating the air, which improves the combustion quality. Advantages: the boiler is high, so does not take up much space in the room, the long top burning, remove the ashes just 2-3 times a month, the boiler requires a buffer tank, a heat exchanger of the boiler is made of steel with a thickness of 7-8 mm.
Manufacturer Warm
Contact Details Warm, Lviv region, Mostiska district, S. Tria K. T. Tel.: +38 (098) 116-20-19, +38 (093) 441-25-85
Manufacture Product Details http://warm-kotel.net.ua
Technology firewood
Max Capacity in kW 15.0
Min Capacity in kW 4.0
Efficiency in % 85.0

Annual savings
Annual savings: UAH 8,500 / 7,000 kWh*
82.4%
17.6%

Annual energy baseline for heating 39,722kWh/a


Annual energy after replacement Warm 15

Your annual savings

*Disclaimers:

1. Inclusion of the technologies, equipment and materials in the Technology Selector is based solely on qualification under IQ energy’s ‘Minimum Energy Performance Standards’** and does not constitute an endorsement of the producers or suppliers of these products by the EBRD. Although every effort has been made to present correct and up to date data, EBRD does not accept responsibility for the accuracy of the data presented.

**Included technologies ‎have been assessed to result in at least a 20% higher energy performance than the market average

2. The savings are calculated for the refurbishment of an average dwelling or the replacement of an average equipment in Ukraine. The actual savings of individual refurbishment projects/equipment can differ from the indicated savings due to specific climatic conditions, size of the dwelling/equipment, consumer behaviour, etc. The displayed energy efficiency measures only have an impact on individual household's bills (savings) if there is consumption based billing available.

3. Even though we have taken reasonable care to apply up-to-date energy prices when calculating savings in UAH, we do not take responsibility for the accuracy of any savings estimates stated on this Site.

4. All prices displayed in our Technology Selector are provided by the suppliers as indicative retail prices and should be used for reference purposes only. The actual prices of the vendors/retailors can be different from those on our web site due to various reasons beyond the influence of IQ energy programme. IQ energy programme does not bear any liability for the price information of any specific product. Please, check with suppliers actual prices for products and technologies you are interested in.