Thermia iTec 16 (1-230 V)

by Thermia
  • Thermia iTec is an air source heat pump with inverter technology. The inverter-controlled compressor adjusts the heat load constantly according to the current heat demand. You never use more energy than is needed, and this of course reduces your energy bills further. Energy is collected from the outdoor air, and is used to heating of hot water and hydronic heating systems, delivering efficient energy savings at temperatures as low as -25 °C. By a unique acoustic design, it is very quiet in operation. The cooling function assures a pleasant indoor climate also during the hottest period of the year. And if you have a swimming pool, you can reduce the heating cost significantly as Thermia iTec is prepared for heating of pools. With a high seasonal performance Thermia iTec allows you to reduce your energy consumption by up to 75%. Thermia iTec is available in three output sizes: 5 kW, 9 kW and 16 kW. It consists of two parts: the heat pump itself, which is installed outdoors, and an indoor unit. You can choose from two versions of the indoor unit, each with different features. The choice of unit depends on the set-up of your heating system, to ensure you never pay for more than you actually need. With Thermia Online you have the ability to remotely control and monitor your heat pump.
  • Thermia iTec is an air source heat pump with inverter technology. The inverter-controlled compressor adjusts the heat load constantly according to the current heat demand. You never use more energy than is needed, and this of course reduces your energy bills further. Energy is collected from the outdoor air, and is used to heating of hot water and hydronic heating systems, delivering efficient energy savings at temperatures as low as -25 °C. By a unique acoustic design, it is very quiet in operation. The cooling function assures a pleasant indoor climate also during the hottest period of the year. And if you have a swimming pool, you can reduce the heating cost significantly as Thermia iTec is prepared for heating of pools. With a high seasonal performance Thermia iTec allows you to reduce your energy consumption by up to 75%. Thermia iTec is available in three output sizes: 5 kW, 9 kW and 16 kW. It consists of two parts: the heat pump itself, which is installed outdoors, and an indoor unit. You can choose from two versions of the indoor unit, each with different features. The choice of unit depends on the set-up of your heating system, to ensure you never pay for more than you actually need. With Thermia Online you have the ability to remotely control and monitor your heat pump.
Manufacturer Thermia
Contact Details Noviterm Ltd, Tupoleva str. 19, Kiev, tel.: (044) 229-17-79, http://www.noviterm.com.ua
Manufacture Product Details http://www.noviterm.com.ua/...
Max Capacity in kW 16.0
Technology air-water
COP 4.41

Annual savings
Annual savings: UAH 34,900 / 29,200 kWh*
26.5%
73.5%

Annual energy baseline for heating 39,722kWh/a


Annual energy after replacement Thermia iTec 16 (1-230 V)

Your annual savings

*Disclaimers:

1. Inclusion of the technologies, equipment and materials in the Technology Selector is based solely on qualification under IQ energy’s ‘Minimum Energy Performance Standards’** and does not constitute an endorsement of the producers or suppliers of these products by the EBRD. Although every effort has been made to present correct and up to date data, EBRD does not accept responsibility for the accuracy of the data presented.

**Included technologies ‎have been assessed to result in at least a 20% higher energy performance than the market average

2. The savings are calculated for the refurbishment of an average dwelling or the replacement of an average equipment in Ukraine. The actual savings of individual refurbishment projects/equipment can differ from the indicated savings due to specific climatic conditions, size of the dwelling/equipment, consumer behaviour, etc. The displayed energy efficiency measures only have an impact on individual household's bills (savings) if there is consumption based billing available.

3. Even though we have taken reasonable care to apply up-to-date energy prices when calculating savings in UAH, we do not take responsibility for the accuracy of any savings estimates stated on this Site.

4. All prices displayed in our Technology Selector are provided by the suppliers as indicative retail prices and should be used for reference purposes only. The actual prices of the vendors/retailors can be different from those on our web site due to various reasons beyond the influence of IQ energy programme. IQ energy programme does not bear any liability for the price information of any specific product. Please, check with suppliers actual prices for products and technologies you are interested in.