TATRAMET BIOTEX 50
Steel bottom burning boiler with vertical heat exchangers. Fuel is waste wood processing (sawdust, wood chips), firewood and briquetted fuel. Dye burning ensures better burn-out of even low-carbon fuels and more economical use, which in combination with a large camera gives a long burning time. The use of chamotteous deposits and multi-point air supply ensures high environmental friendliness of flue gases.
Steel boilers • 4 years warranty on the heat exchanger tightness • The inner walls are made of steel grade S235JR 6-8 mm thick • High efficiency of operation • Continuous operation on a single load and the possibility of increasing the loading chamber due to an additional hopper) • High efficiency and fuel economy • Chamotte inserts and air nozzles for improved fuel combustion and improved environmental compatibility of flue gases • Regulation of the combustion process using a weather-compensated electronic control unit, controls the operation of the heating system and hot water supply. • The possibility of installation in closed systems with a working pressure of 0.2 MPa • Heat insulation of the housing with non-combustible mineral wool • Powder coating of the shell skin
|Contact Details||Ltd "Polish-Ukrainian joint Company TATRAMET ", Shevchenka st. 317, Lviv 79069 Ukraine, www.tatramet.com.ua, firstname.lastname@example.org|
|Manufacture Product Details||http://www.tatramet.com.ua|
|Technology||firewood, fuel briquettes, pellets|
|Max Capacity in kW||50.0|
|Min Capacity in kW||15.0|
|Efficiency in %||90.0|
Annual energy baseline for heating 39,722kWh/a
Annual energy after replacement TATRAMET BIOTEX 50
Your annual savings
1. Inclusion of the technologies, equipment and materials in the Technology Selector is based solely on qualification under IQ energy’s ‘Minimum Energy Performance Standards’** and does not constitute an endorsement of the producers or suppliers of these products by the EBRD. Although every effort has been made to present correct and up to date data, EBRD does not accept responsibility for the accuracy of the data presented.
**Included technologies have been assessed to result in at least a 20% higher energy performance than the market average
2. The savings are calculated for the refurbishment of an average dwelling or the replacement of an average equipment in Ukraine. The actual savings of individual refurbishment projects/equipment can differ from the indicated savings due to specific climatic conditions, size of the dwelling/equipment, consumer behaviour, etc. The displayed energy efficiency measures only have an impact on individual household's bills (savings) if there is consumption based billing available.
3. Even though we have taken reasonable care to apply up-to-date energy prices when calculating savings in UAH, we do not take responsibility for the accuracy of any savings estimates stated on this Site.
4. All prices displayed in our Technology Selector are provided by the suppliers as indicative retail prices and should be used for reference purposes only. The actual prices of the vendors/retailors can be different from those on our web site due to various reasons beyond the influence of IQ energy programme. IQ energy programme does not bear any liability for the price information of any specific product. Please, check with suppliers actual prices for products and technologies you are interested in.