by Stolit
  • СТОЛІТ ЄВРОСТАНДАРТ is made by foaming of polystyrene granules with subsequent formation into blocks, which after air drying are cut into sheets. A good option in terms of price and quality. A sufficient level of mechanical strength and good performance of thermal protection. Most often used for facade insulation single/two storey buildings.
  • Application area: - Wall insulation is made by "light wet" or "dry light"; - Filling the walls of a frame house; - Laying in brickwork; - Moldings, door frames, lintels and other places where there is risk of cold bridge; - Loggia balcony; - The outer layer of the walls of a frame house; - To align the walls under plaster; - The ceiling from the inside, is made by the method of "light wet"; - The space between and under rafters in pitched roofs.
Manufacture Product Details http://www.stolit.ua/...
Manufacturer Stolit
Contact Details "Ukrspetstechnika" Ltd, 55A, Promyslova str., Lviv, 79024, Ukraine ukrspets@stolit.ua www.stolit.ua
Material EPS
Lambda in W/(m·K) 0.040
Thickness in mm 100
R-Value m²K/W 2.50

Annual savings
Annual savings: UAH 4,100 / 3,400 kWh*

Annual energy baseline for heating 39,722kWh/a

Annual energy after replacement СТОЛІТ ЄВРОСТАНДАРТ (100 mm)

Your annual savings


1. Inclusion of the technologies, equipment and materials in the Technology Selector is based solely on qualification under IQ energy’s ‘Minimum Energy Performance Standards’** and does not constitute an endorsement of the producers or suppliers of these products by the EBRD. Although every effort has been made to present correct and up to date data, EBRD does not accept responsibility for the accuracy of the data presented.

**Included technologies ‎have been assessed to result in at least a 20% higher energy performance than the market average

2. The savings are calculated for the refurbishment of an average dwelling or the replacement of an average equipment in Ukraine. The actual savings of individual refurbishment projects/equipment can differ from the indicated savings due to specific climatic conditions, size of the dwelling/equipment, consumer behaviour, etc. The displayed energy efficiency measures only have an impact on individual household's bills (savings) if there is consumption based billing available.

3. Even though we have taken reasonable care to apply up-to-date energy prices when calculating savings in UAH, we do not take responsibility for the accuracy of any savings estimates stated on this Site.

4. All prices displayed in our Technology Selector are provided by the suppliers as indicative retail prices and should be used for reference purposes only. The actual prices of the vendors/retailors can be different from those on our web site due to various reasons beyond the influence of IQ energy programme. IQ energy programme does not bear any liability for the price information of any specific product. Please, check with suppliers actual prices for products and technologies you are interested in.