SAS NWT 29 кВт

by SAS
  • Boilers are designed for burning wood on the principle of generator gasification using a suction fan that removes combustion products from the boiler or drives air into the boiler. Boiler casings are made of welded steel sheets with a thickness of 3-8 mm, consist of a bulk part for fuel, which is equipped in the lower part with a heat-resistant branch pipe with a longitudinal hole for the passage of combustion products and gases. The combustion space, which is under the bulk part, is lined with ceramic blocks. In the rear of the boiler housing is a vertical channel for combustion products, equipped in the upper part with a valve for melting. In the upper part of the duct for combustion products there is a branch pipe for connection to the chimney.
  • Boilers are designed for burning wood on the principle of generator gasification using a suction fan that removes combustion products from the boiler or drives air into the boiler. Boiler casings are made of welded steel sheets with a thickness of 3-8 mm, consist of a bulk part for fuel, which is equipped in the lower part with a heat-resistant branch pipe with a longitudinal hole for the passage of combustion products and gases. The combustion space, which is under the bulk part, is lined with ceramic blocks. In the rear of the boiler housing is a vertical channel for combustion products, equipped in the upper part with a valve for melting. In the upper part of the duct for combustion products there is a branch pipe for connection to the chimney.
Contact Details LLC "TeploFormat", 9, Syrecka Str. Kyiv, Ukraine  tel.: +38 (098) 844-94-42
Manufacture Product Details https://feko.com.ua/...
Technology firewood
Max Capacity in kW 29.0
Min Capacity in kW 8.7
Efficiency in % 85.0

Annual savings
Annual savings: UAH 8,500 / 7,000 kWh*
82.4%
17.6%

Annual energy baseline for heating 39,722kWh/a


Annual energy after replacement SAS NWT 29 кВт

Your annual savings

*Disclaimers:

1. Inclusion of the technologies, equipment and materials in the Technology Selector is based solely on qualification under IQ energy’s ‘Minimum Energy Performance Standards’** and does not constitute an endorsement of the producers or suppliers of these products by the EBRD. Although every effort has been made to present correct and up to date data, EBRD does not accept responsibility for the accuracy of the data presented.

**Included technologies ‎have been assessed to result in at least a 20% higher energy performance than the market average

2. The savings are calculated for the refurbishment of an average dwelling or the replacement of an average equipment in Ukraine. The actual savings of individual refurbishment projects/equipment can differ from the indicated savings due to specific climatic conditions, size of the dwelling/equipment, consumer behaviour, etc. The displayed energy efficiency measures only have an impact on individual household's bills (savings) if there is consumption based billing available.

3. Even though we have taken reasonable care to apply up-to-date energy prices when calculating savings in UAH, we do not take responsibility for the accuracy of any savings estimates stated on this Site.

4. All prices displayed in our Technology Selector are provided by the suppliers as indicative retail prices and should be used for reference purposes only. The actual prices of the vendors/retailors can be different from those on our web site due to various reasons beyond the influence of IQ energy programme. IQ energy programme does not bear any liability for the price information of any specific product. Please, check with suppliers actual prices for products and technologies you are interested in.