The optimized energy-saving ventilation units of the MV-I series are intended for cleaning, heating and supplying fresh air to residential, public and industrial premises of small areas: offices, shops, apartments, etc. During the ventilation of the units the air is removed from the premises, removing it from the air heat and moisture and transmitting them to the tidal air. Thus, the installation allows you to save energy and efficiently ventilate the premises.
Quiet and reliable. Efficiency of heat recovery up to 75% Recovery of moisture up to 65% High-pressure fans (best characteristics in their class) Built-in air bypass Updated software Intelligent controller with touch screen Presence of external signals On / Off External Bypass Management Fire alarm shutdown Output signals and alarms Controlling the two stages of the external electric heater Regulation of supply air temperature within 10-25 °С Working with the Modbus dispatch protocol Built-in 4 temperature sensors Weekly Timer Protecting the recuperator from frost
|Contact Details||Aclima, 28a (B), Stepana Benderi Ave., Kyiv, 04073, Ukraine, tel.: +38 (044) 500-00-59, firstname.lastname@example.org|
|Manufacture Product Details||http://aclima.ua/...|
|Efficiency in %||75.0|
Annual energy baseline 22,944kWh/a
Annual energy after replacement of MYCOND MV400I-N-TS
Your annual savings
1. Inclusion of the technologies, equipment and materials in the Technology Selector is based solely on qualification under IQ energy’s ‘Minimum Energy Performance Standards’** and does not constitute an endorsement of the producers or suppliers of these products by the EBRD. Although every effort has been made to present correct and up to date data, EBRD does not accept responsibility for the accuracy of the data presented.
**Included technologies have been assessed to result in at least a 20% higher energy performance than the market average
2. The savings are calculated for the refurbishment of an average dwelling or the replacement of an average equipment in Ukraine. The actual savings of individual refurbishment projects/equipment can differ from the indicated savings due to specific climatic conditions, size of the dwelling/equipment, consumer behaviour, etc. The displayed energy efficiency measures only have an impact on individual household's bills (savings) if there is consumption based billing available.
3. Even though we have taken reasonable care to apply up-to-date energy prices when calculating savings in UAH, we do not take responsibility for the accuracy of any savings estimates stated on this Site.
4. All prices displayed in our Technology Selector are provided by the suppliers as indicative retail prices and should be used for reference purposes only. The actual prices of the vendors/retailors can be different from those on our web site due to various reasons beyond the influence of IQ energy programme. IQ energy programme does not bear any liability for the price information of any specific product. Please, check with suppliers actual prices for products and technologies you are interested in.