The system of insulation using the Scanterm 100 mm foam polystyrene boards

by Scanterm
  • Insulation with Scanmix foam, finishing with mineral plaster for painting or tinted acrylic plaster. System components: 1. Scanmix Gold Primer 2. adhesive for foam polystyrene boards Scanmix Fix 210, 3. Foam polystyrene Scanmix M-25-NORMAL (100 mm), 4. mechanical fasteners (dowel facade 160 mm), 5. Scandinavian meadow net (density 160 g / m 2) 6. Scanmix Universal 220, 7. Quartz-Ground Scanmix Standart or Scanmix Gold, 8. decorative plaster Scanmix MIKRO DEKOR, 9. facade paint Scanmix Facade Normal.
  • The production of "SCANTERM" boards is a further development of the technology of production of insulation materials made of EPS foam polystyrene and is a modern and most effective alternative to products from extruded polystyrene XPS. Advantages of the "SCANTERM" boards are: high thermal insulation ability, -Ultimate physical and mechanical properties, -Equality, ease of installation, high carrying capacity at relatively low density, -intentional to inorganic materials, high reliability and durability.
Manufacture Product Details
Contact Details "Scanplast", scanplast @, + 380532691881, 36008, m.Poltava, vul. Avtobazovska 7,
Material Facade systems
Lambda in W/(m·K) 0.037
Thickness in mm 100
R-Value m²K/W 2.70

Annual savings
Annual savings: UAH 11,100 / 9,100 kWh*

Annual energy baseline for heating 39,722kWh/a

Annual energy after replacement The system of insulation using the Scanterm 100 mm foam polystyrene boards

Your annual savings


1. Inclusion of the technologies, equipment and materials in the Technology Selector is based solely on qualification under IQ energy’s ‘Minimum Energy Performance Standards’** and does not constitute an endorsement of the producers or suppliers of these products by the EBRD. Although every effort has been made to present correct and up to date data, EBRD does not accept responsibility for the accuracy of the data presented.

**Included technologies ‎have been assessed to result in at least a 20% higher energy performance than the market average

2. The savings are calculated for the refurbishment of an average dwelling or the replacement of an average equipment in Ukraine. The actual savings of individual refurbishment projects/equipment can differ from the indicated savings due to specific climatic conditions, size of the dwelling/equipment, consumer behaviour, etc. The displayed energy efficiency measures only have an impact on individual household's bills (savings) if there is consumption based billing available.

3. Even though we have taken reasonable care to apply up-to-date energy prices when calculating savings in UAH, we do not take responsibility for the accuracy of any savings estimates stated on this Site.

4. All prices displayed in our Technology Selector are provided by the suppliers as indicative retail prices and should be used for reference purposes only. The actual prices of the vendors/retailors can be different from those on our web site due to various reasons beyond the influence of IQ energy programme. IQ energy programme does not bear any liability for the price information of any specific product. Please, check with suppliers actual prices for products and technologies you are interested in.