Ecoplit F/2 50

by Sweetondale
  • Extruded polystyrene foam Ecoplit F / 2 specially designed for plaster facade designs, insulated plinths.
  • Extruded polystyrene foam Ecoplite F / 2 TU U V.2.7-25.2-35409837-001: 2008 with cor. №1 Product Description: Ecoplite F / 2 - is a heat insulation plate made of extruded polystyrene foam with a special structural and relief surface on both sides. Designed for thermal insulation of private houses, repair of living quarters. Structurally - relief surface provides: - the maximum possible adhesion with the plaster mixtures; - reliable long-term protection of the facade; - increase adhesion of gluing, without increasing costs of plaster mixtures; - Reduction of time spent on material processing; - a professional solution for the facade insulation. Application area: Extruded polystyrene foam Ecoplite F / 2 specially designed for plaster facade designs, thermal insulation of plinths. It can also be used for other structures, where higher requirements are required for adhesion of thermal insulation boards to the substrate.
Manufacture Product Details www.xps.tn.ua
Contact Details LLC "Zavod TEKHNONIKOL", 2, Torgovelna str., Kamyanske, 51901, +38 067 240 08 44, http://www.tn.ua, kozachok@sweetondale.cz
Material XPS
Lambda in W/(m·K) 0.036
Thickness in mm 50
R-Value m²K/W 1.39

Annual savings
Annual savings: UAH 8,900 / 7,300 kWh*
81.6%
18.4%

Annual energy baseline for heating 39,722kWh/a


Annual energy after replacement Ecoplit F/2 50

Your annual savings

*Disclaimers:

1. Inclusion of the technologies, equipment and materials in the Technology Selector is based solely on qualification under IQ energy’s ‘Minimum Energy Performance Standards’** and does not constitute an endorsement of the producers or suppliers of these products by the EBRD. Although every effort has been made to present correct and up to date data, EBRD does not accept responsibility for the accuracy of the data presented.

**Included technologies ‎have been assessed to result in at least a 20% higher energy performance than the market average

2. The savings are calculated for the refurbishment of an average dwelling or the replacement of an average equipment in Ukraine. The actual savings of individual refurbishment projects/equipment can differ from the indicated savings due to specific climatic conditions, size of the dwelling/equipment, consumer behaviour, etc. The displayed energy efficiency measures only have an impact on individual household's bills (savings) if there is consumption based billing available.

3. Even though we have taken reasonable care to apply up-to-date energy prices when calculating savings in UAH, we do not take responsibility for the accuracy of any savings estimates stated on this Site.

4. All prices displayed in our Technology Selector are provided by the suppliers as indicative retail prices and should be used for reference purposes only. The actual prices of the vendors/retailors can be different from those on our web site due to various reasons beyond the influence of IQ energy programme. IQ energy programme does not bear any liability for the price information of any specific product. Please, check with suppliers actual prices for products and technologies you are interested in.