Energy-saving ventilated facade system SCANROC (Knauf Insulation 034A +) 120 mm
Facade system SCANROC - effective thermal protection system houses System's components: 1. Console 2. The insulating gasket 3. Horizontal profile 4. insulation Knauf Insulation 034A + Knauf isulation FKD 5. plug washer 6. The vertical profile 7. stone facade
Energy-saving ventilated facade system SCANROC - this is the right decision for cladding and insulation of all types of buildings! The key feature of the façade system is - always active air channel located between the insulation (mineral wool) and high quality facade stone that throughout the life supporting heater in optimal characteristics. Exterior Insulation and cladding of objects, solves a set of important tasks, one of which is heat and energy consumption characteristics. SCANROC ventilated facade system can significantly reduce heat transfer coefficient, resulting in significantly reduced resource consumption for heating during the cold season and air conditioning in summer, about 40%. SCANROC facade systems not only provide comfort and savings teploresursiv, but also satisfy all the possible design and architectural ideas of facing buildings.
|Manufacture Product Details||http://scanroc.ua/|
|Contact Details||LLC SCANROC Str. Volgograd 41, 03141, 38044-270-18-08 Fax 38044-275-71-72, e-mail: firstname.lastname@example.org|
|Lambda in W/(m·K)||0.034|
|Thickness in mm||120|
Annual energy baseline for heating 39,722kWh/a
Annual energy after replacement Energy-saving ventilated facade system SCANROC (Knauf Insulation 034A +) 120 mm
Your annual savings
1. Inclusion of the technologies, equipment and materials in the Technology Selector is based solely on qualification under IQ energy’s ‘Minimum Energy Performance Standards’** and does not constitute an endorsement of the producers or suppliers of these products by the EBRD. Although every effort has been made to present correct and up to date data, EBRD does not accept responsibility for the accuracy of the data presented.
**Included technologies have been assessed to result in at least a 20% higher energy performance than the market average
2. The savings are calculated for the refurbishment of an average dwelling or the replacement of an average equipment in Ukraine. The actual savings of individual refurbishment projects/equipment can differ from the indicated savings due to specific climatic conditions, size of the dwelling/equipment, consumer behaviour, etc. The displayed energy efficiency measures only have an impact on individual household's bills (savings) if there is consumption based billing available.
3. Even though we have taken reasonable care to apply up-to-date energy prices when calculating savings in UAH, we do not take responsibility for the accuracy of any savings estimates stated on this Site.
4. All prices displayed in our Technology Selector are provided by the suppliers as indicative retail prices and should be used for reference purposes only. The actual prices of the vendors/retailors can be different from those on our web site due to various reasons beyond the influence of IQ energy programme. IQ energy programme does not bear any liability for the price information of any specific product. Please, check with suppliers actual prices for products and technologies you are interested in.