Kronas TA (200 л)
Heat accumulator for solid fuel boiler
The heat accumulator for a solid fuel boiler is a universal device that significantly increases the efficiency of the heating system. The buffer capacity of the heating system simultaneously solves several problems: - takes an excess of heat energy produced by the boiler. Thus, the boiler does not enter the low-power or smoldering mode (in which there is a significant reduction in efficiency due to an increase in the fraction of CO); - prolong the period between fuel loads; -Switch the period between servicing the boiler. In the absence of the smoldering regime, the heat exchanger of the boiler is much less exposed to clogging, while maintaining a high efficiency; - Excludes the possibility of boiler boiling. With the correct strapping, the heat accumulator takes over the heat produced by the boiler, for example: when the power is cut off. The heat accumulator for the boiler can be equipped with one or more heat exchangers, which greatly increases the possibilities of its use. The upper heat exchanger, as a rule, is used for heat removal, and the lower one for heating the buffer tank. With the help of a heat exchanger in the heat accumulator, you can receive hot sanitary water, heat the tank from the solar collector, organize heating of the tracks and much more. Using additional connections, the heat accumulator can be connected to several boilers simultaneously, using it as a hydraulic separator.
|Contact Details||LLC " Kronas - Pіvnіch ", 78, Mazepy Str., Chernіgіv, Ukraine, tel.: +38 ( 0462 ) 96-03-33|
|Manufacture Product Details||https://kronas.ua|
|Thickness in mm||100|
|Lambda in W/(m·K)||0.000|
Annual energy baseline for heating 22,944kWh/a
Annual energy after replacement Kronas TA (200 л)
Your annual savings
1. Inclusion of the technologies, equipment and materials in the Technology Selector is based solely on qualification under IQ energy’s ‘Minimum Energy Performance Standards’** and does not constitute an endorsement of the producers or suppliers of these products by the EBRD. Although every effort has been made to present correct and up to date data, EBRD does not accept responsibility for the accuracy of the data presented.
**Included technologies have been assessed to result in at least a 20% higher energy performance than the market average
2. The savings are calculated for the refurbishment of an average dwelling or the replacement of an average equipment in Ukraine. The actual savings of individual refurbishment projects/equipment can differ from the indicated savings due to specific climatic conditions, size of the dwelling/equipment, consumer behaviour, etc. The displayed energy efficiency measures only have an impact on individual household's bills (savings) if there is consumption based billing available.
3. Even though we have taken reasonable care to apply up-to-date energy prices when calculating savings in UAH, we do not take responsibility for the accuracy of any savings estimates stated on this Site.
4. All prices displayed in our Technology Selector are provided by the suppliers as indicative retail prices and should be used for reference purposes only. The actual prices of the vendors/retailors can be different from those on our web site due to various reasons beyond the influence of IQ energy programme. IQ energy programme does not bear any liability for the price information of any specific product. Please, check with suppliers actual prices for products and technologies you are interested in.