ATTACK 30 DPX LAMBDA
The wood gasifying boilers ATTACK DPX are intended for economical and ecological heating of dwelling houses, cottages, small plants, work rooms and similar objects. Prescribed fuel for DPX boilers is dry wood. At full utilization of the hopper there is possibility of the continual burning for 8-12 hours.
The new boiler line ATTACK DPX is equipped with the more efficient tubular exchanger flue gas – water. Special movable turbulators installed inside the exchanger serve to brake and to make the turbulent flow of the flue gas through the exchanger. Thereby it comes to higher heat transfer through the steel exchanger wall into the heating water. Turbulators also enable easy exchanger cleaning. The clean exchanger reaches the most effective operation parameters – the high efficiency. From technical view it is a boiler line with high efficiency, low flue gas temperature and more effective combustion process. Achieved efficiency of the ATTACK DPX boiler is 90 %. By installation of more efficient boiler of the ATTACK DPX line it comes to significant decrease of the operating costs,projected into the fuel savings, in comparison with less efficient boilers that combust same fuel. From the social-wide view, it is an enviroment-friendly source, combusting wooden biomass, which is a kind of CO2-neutral fuel. Considering the harmful emissions, the average concentration of CO value in the flue gas, is during operation of the LAMBDA version under the level of 200 mg/m3 related to 10 % of O2. Under the valid European norm EN303-5, classifying the solid fuel boilers by efficiency and emissions to individual classes, the ATTACK DPX boiler (version LAMBDA) reaches 25 times lower concentration of harmful CO emisions in the flue gas in comparison with the allowed level of this norm! ATTACK DPX LAMBDA The wood gasifying boiler ATTACK DPX 40 Lambda disposes with the most advanced technology of the combustion process control to achieve the excellent values of emissions and efficiency. Controller can individually regulate amount of the primary and the secondary air, adequately to data about oxygene content from Lambda probe, boiler temperature and flue gas temperature. All the operation parameters are displayed on the well-readable multiline LCD display. The parameters can be change via buttons placed on the control panel of the boiler. Eventual error or warning messages are signalized by flickering LED diodes. After the fuel burn-out is the boiler automatically stopped according to the flue gas temperature or the oxygene content in the flue gas. All modifications of the ATTACK DPX boilers can be equipped with an additional regulator which ensures control of the accumulation tank, solar panels or other sources of heat energy in different designs of the heating systems, according to the customer´s demands.
|Contact Details||Bogemia company, 79020, Lviv, Malogoloskovskaya str., 8D; +380673145156; firstname.lastname@example.org; bogemia.com.ua|
|Manufacture Product Details||http://bogemia.com.ua/...|
|Max Capacity in kW||30.0|
|Min Capacity in kW||9.0|
|Efficiency in %||90.1|
Annual energy baseline for heating 39,722kWh/a
Annual energy after replacement ATTACK 30 DPX LAMBDA
Your annual savings
1. Inclusion of the technologies, equipment and materials in the Technology Selector is based solely on qualification under IQ energy’s ‘Minimum Energy Performance Standards’** and does not constitute an endorsement of the producers or suppliers of these products by the EBRD. Although every effort has been made to present correct and up to date data, EBRD does not accept responsibility for the accuracy of the data presented.
**Included technologies have been assessed to result in at least a 20% higher energy performance than the market average
2. The savings are calculated for the refurbishment of an average dwelling or the replacement of an average equipment in Ukraine. The actual savings of individual refurbishment projects/equipment can differ from the indicated savings due to specific climatic conditions, size of the dwelling/equipment, consumer behaviour, etc. The displayed energy efficiency measures only have an impact on individual household's bills (savings) if there is consumption based billing available.
3. Even though we have taken reasonable care to apply up-to-date energy prices when calculating savings in UAH, we do not take responsibility for the accuracy of any savings estimates stated on this Site.
4. All prices displayed in our Technology Selector are provided by the suppliers as indicative retail prices and should be used for reference purposes only. The actual prices of the vendors/retailors can be different from those on our web site due to various reasons beyond the influence of IQ energy programme. IQ energy programme does not bear any liability for the price information of any specific product. Please, check with suppliers actual prices for products and technologies you are interested in.